info@hanqicnc.cn    +86-0512-67214582
enLanguage
Cont

Have any Questions?

+86-0512-67214582

Jun 05, 2024

Example of CNC machining programming for taper in wire cutting

The CNC programming of taper cutting in wire cutting can be carried out in a relatively flexible manner according to the actual situation.

 

1. Programming for fixed taper machining

For fixed tapers with the same upper and lower shapes, only a two-dimensional contour machining program needs to be developed according to the corresponding reference plane, and then the fixed taper cutting function inherent in the CNC wire cutting system can be used for taper cutting.

 

2. Programming for variable taper cutting machining

In the actual processing of products, it is common to encounter variable taper cutting with different upper and lower shapes or roughly similar shapes but unequal tapers. For such products, the programming method of upper and lower irregular shapes is often used, which involves three-dimensional modeling of the contour of the upper and lower planes of the workpiece according to the actual product, and then programming the tool trajectory of the four-axis linkage taper cutting using CAM software. This method generates a large amount of programming.

 

3. Fixed taper reversing programming

The taper direction of the inner and outer surfaces of the product is consistent. If a fixed taper is used, the contour cannot be processed completely at once. If the up and down irregular taper method is used for programming, a large amount of program will be generated. Therefore, the author combines the programming method of fixed taper to complete the machining of the inner and outer surfaces simultaneously in one program using the method of taper reversal, which ensures product quality and improves machining efficiency.

Send Inquiry