info@hanqicnc.cn    +86-0512-67214582
enLanguage
Cont

Have any Questions?

+86-0512-67214582

Jun 12, 2024

Limitation Of Electrical Discharge Machining

Despite its many advantages, there are some drawbacks to applying electric discharge machining. They include the following:

 

Can Only Machine conductive Materials

Only electrically conductive metals work well with the EDM method. Although this process is stress-free, you must note that the heat treatment may affect the metallurgy of the almost finished product.

 

Slow Rate of Material Removal

The material removal rate in an EDM machine is pretty slow, unlike the conventional machining processes. The machining process is undoubtedly a high-intensity method. This means that it takes a longer time. As a result, the increase in manufacturing time affects the overall cost. Therefore, EDM is not an efficient application process when it comes to large-scale projects.

 

More Expensive than Conventional Milling or Turning

The EDM method is more expensive than conventional milling because of its high electricity demand. It creates an extreme carbon footprint, making it less environmentally friendly. Many companies worldwide aim to provide adequate measures to reduce carbon footprints and introduce other methods that demand less electricity. These methods are preferred to EDM operation and are less detrimental to the environment.

 

Difficulty in Reproducing Sharp Corners on the Workpiece

Since EDM manufacturing depends on electricity and heat to remove the metal, the electrode becomes worn out. Consequently, this affects the electrode wear, mainly deposited in a workpiece's sharp corners or low surfaces. The reproducing accuracy of the electrode will be affected negatively.

Send Inquiry